Glossary
Every term with a dotted underline on this site, in plain words first.
- Beam
The cone or fan of sound a sonar sends out. A narrow beam looks at a small area in more detail.
Technical · Its width is set by the size of the transducer and the frequency.
- Chirp
A pulse whose pitch sweeps up or down while it lasts.
Technical · Pulse compression with a chirp gives long reach and fine range resolution together.
- Echogram
A picture built from successive echoes, with depth running down and time running across. Fish, layers and the seabed show up as marks.
- Frequency
How many times per second a sound wave oscillates, measured in hertz (Hz). A high frequency is a high-pitched sound.
Technical · Sonars range from tens of hertz to hundreds of kilohertz.
- Gradient
How fast sound speed changes with depth, in metres per second for each metre. A negative value means sound slows as you go deeper.
Technical · Here dc/dz, in s⁻¹.
- Low frequency
Low-pitched sound, from a few hertz to a few hundred hertz. Seawater absorbs it so weakly that it can travel thousands of kilometres.
Technical · Absorption in seawater rises steeply with frequency.
- Mixed layer
The top layer of the ocean, stirred by wind and waves so that its temperature is nearly uniform.
Technical · Usually tens to a few hundred metres thick. With temperature constant, pressure makes sound speed rise with depth.
- Pressure
The weight of the water above you. It grows by about one atmosphere for every 10 m of depth.
Technical · On its own, pressure raises sound speed by roughly 1.7 m/s per 100 m of depth.
- Pulse
A short burst of sound, also called a ping. The bright magenta segments show where the pulse is right now on each ray.
Technical · The animation repeats it every few seconds.
- Range
Horizontal distance from the source.
- Ray
A line showing the path a small piece of the sound follows. Where rays bunch together sound is strong; where they leave gaps it is weak.
Technical · Ray tracing integrates Snell’s law step by step. It works best at higher frequencies.
- Refraction
Sound bends toward the water where it travels slower, the way light bends entering glass.
Technical · Snell’s law sets the bend: cos θ / c stays constant along a ray.
- Seabed
The ocean floor. Sound that reaches it is partly absorbed, partly scattered and partly reflected.
Technical · The loss depends on sediment type, roughness, frequency and the angle of arrival.
- Seabed echo
Sound that reaches the seabed. Much of the energy is absorbed or scattered there, and some comes back as an echo.
Technical · How much returns depends on the seabed type and the angle of arrival.
- Shadow zone
A region the rays do not reach, so sound there is very weak. A target inside it is hard to detect.
Technical · It forms when rays bend downward and leave a gap beneath the layer.
- Sonar
Short for sound navigation and ranging: using sound to find and locate things underwater.
Technical · Active sonar sends a pulse and listens for the echo. Passive sonar only listens.
- Sonar equation
A budget: the sound sent out, minus what is lost on the way, compared with the noise it has to beat to be heard.
Technical · Active form at threshold: SL − 2TL + TS − (NL − DI) = DT.
- Sound channel
The depth where sound is slowest. Sound above and below bends toward it, so it stays trapped in a channel.
Technical · Also called the SOFAR channel. Its axis sits near 1,000 m at mid-latitudes; here it is at 1,300 m in the stylised profile.
- Sound speed
How fast sound travels in water: about 1,500 m/s, more than four times faster than in air. It changes with temperature, pressure and salinity.
Technical · Written c(z) when it varies with depth z. This site uses a stylised Munk-type profile, not measured data.
- Sound-speed profile
A graph of sound speed against depth.
Technical · Measured with a sound velocity probe, or computed from temperature, salinity and depth.
- Source
The point that emits the sound pulse. It moves down as you scroll.
Technical · Its depth decides which rays leave it and where they go.
- Spectrum
How the energy of a signal is spread across frequencies.
Technical · Computed with a Fourier transform.
- Surface duct
A layer that traps sound near the surface, like a pipe. Rays bounce between the surface and the bottom of the layer instead of escaping downward.
Technical · It forms where sound speed increases with depth. Trapping is strongest at high frequencies.
- Thermocline
The layer of ocean where temperature drops quickly with depth.
Technical · Because sound speed follows temperature, it drops here too, which bends rays downward.
- Tilt
The angle of the beam below the horizontal.
Technical · A fishing sonar tilts its beam to sweep the water ahead of the vessel.
- Vertical scale
The plot is far wider than it is deep. To make depth readable it is stretched vertically, so real ray angles are much shallower than they look.
- Water column
The ocean seen as a vertical stack, from the surface down to the seabed.
Technical · Properties such as temperature and sound speed are usually described as functions of depth in the column.